15001 Dial-Up Networking Monitor 15002 Networks and users 15003 Duration 15004 Users 15005 Dial-up Lines 15006 Condition 15007 User Hangup 15008 Remote Hangup 15009 Hardware Failure 15010 Connecting 15011 Listening for call 15012 Connected 15013 Disconnecting 15014 Disconnected 15015 Listen complete 15016 Idle 15017 212 15018 1 15019 555-1212 15020 Active 15021 Inactive 15022 Connected to %s 15023 Inactive Lines 15024 The value entered for the refresh rate is invalid. 15025 Disconnect device %1? 15026 Disconnect caller %1? 15027 %s connected 15028 You must check at least one modem or adapter. 15029 All Devices 15030 Unavailable 15031 Incoming 15032 Outgoing 15033 Incoming (multi-link) 15034 Outgoing (multi-link) 15035 User connecting 16003 Down-level RAS 16004 PPP 16005 PPP multi-link 16006 SLIP 16007 Details 16008 %d%% 16009 Device: 16010 Network: 16011 (not connected) 16012 Cannot load connection list. 16013 Cannot retrieve framing information. 16014 Cannot retrieve projection information. 16015 Client: 16016 Cannot retrieve port information. 20001 Cannot load dialog. 20002 Cannot load property page. 20003 PPP: Windows NT, Windows 95 Plus, Internet 20004 SLIP: Internet 20005 Windows NT 3.1, Windows for Workgroups 3.11 20006 MyDialUpServer 20007 User Preferences 20008 Cannot read user preferences from registry. 20009 New Phonebook Entry 20010 Edit Phonebook Entry 20011 Writing preferences to registry 20012 Dial-Up Networking 20014 You must choose a value from %1 to %2 for this field. 20015 Cannot load phonebook. 20016 Cannot write phonebook. 20017 An entry named %1 already exists. Choose a different name. 20018 The entry name must contain at least one non-blank character and cannot begin with a period. Choose a different name. 20019 Cannot retrieve data. 20020 No entry is selected. Press the New button to create an entry. 20021 Delete %1 from the phonebook? 20022 Multiple Lines 20023 (Press Configure to set) 20024 COM1 20025 The phonebook is empty.\n\nPress OK to add an entry. 20026 Cannot save data. 20027 Make the phone number change permanent? 20028 Cannot load TAPI information. 20029 The area code must contain only the digits 0 to 9. 20030 Cannot save TAPI information. 20031 Cannot load X.25 information. 20032 (none) 20033 An X.25 Address is required when an X.25 dial-up network or X.25 device is selected. 20034 Cannot load script information. 20036 A non-zero IP address must be supplied when 'specify an IP address' is selected. 20037 Phone Numbers 20038 &New phone number: 20039 &Phone numbers: 20040 &Move successful number to the top of the list on connection 20041 Cannot display data. 20042 Discard multiple line settings for the entry? 20043 That device cannot be dynamically configured. 20044 The modem is not installed. 20045 TCP/IP 20046 IPX/SPX or compatible 20047 NetBEUI 20048 The %1 protocol cannot be selected because it is not installed or is disabled for Remote Access. To change, in Control Panel start Network, choose Services page, Remote Access Properties, and press the Network button. 20049 TCP/IP protocol is required to call SLIP servers. 20050 NetBEUI protocol is required to call older RAS servers. 20051 Before you can call SLIP servers you must install the TCP/IP protocol. TCP/IP can be installed with the Control Panel Network applet. 20052 Before you can call older RAS servers you must install the NetBEUI protocol. NetBEUI can be installed with the Control Panel Network applet. 20053 Due to import/export restrictions, data encryption is not available in this version of Windows NT. 20054 (the current location) 20055 Cannot get auto-dial information. 20056 Cannot set auto-dial information. 20057 Cannot load RAS Manager port information. 20058 Modem or device 20059 Phone number 20060 Remove the selected device(s) from the list? 20061 Call me back at... 20062 Phone &number: 20065 Enter a user name and password with access to the remote network domain. 20066 Cannot save password. 20067 Cannot delete saved password. 20068 Opening port... 20069 Port opened. 20070 Preconnecting through %1... 20071 Preconnect complete. 20072 Dialing %1... 20073 Modem connect complete. 20074 Connecting over X.25 to %1... 20075 X.25 connect complete. 20076 Postconnecting through %1... 20077 Postconnect complete. 20078 Connecting over null device... 20079 Null device connect complete. 20080 Connecting through %1... 20081 Device connected. 20082 All devices connected. 20083 Verifying username and password... 20084 Checking authentication status... 20085 Retrying authentication... 20086 Sending callback information... 20087 Sending new password... 20088 Registering your computer on the network... 20089 Receiving registration result... 20090 Verifying username and password... 20091 Authenticated. 20092 Preparing for callback... 20093 Waiting for modem reset... 20094 Waiting for callback... 20095 Calculating link speed... 20096 Checking network protocol connections... 20097 Connected. 20098 Disconnected. 20100 Modems connecting... 20101 Unknown state. 20102 Cannot connect the phonebook entry. 20203 Cannot reach %1.\nDo you want to dial a remote network? 20204 The 'initial speed' selected exceeds the recommended maximum for this modem with hardware flow control disabled. This setting is likely to cause overrun errors.\n\nLower 'initial speed' to the recommended maximum of %1 bps? 20205 Unavailable device 20206 Modem configuration set to defaults 20207 Cannot send buffer to device. 20208 Cannot receive buffer from device. 20209 Cannot get send/receive buffer. 20210 Cannot get status information for a port. 20211 SLIP Login Terminal 20212 Before Dial Terminal 20213 After Dial Terminal 20214 Manual Modem Command Terminal 20215 &Dial 20216 Hang &Up 20217 The entry cannot be deleted because it is connected. 20218 Disconnect from %1? 20219 Name: %1\n 20220 Fail Code: 0x%1\n 20221 %1 CP reported error %2: %3\n 20222 %1 CP connected successfully.\n 20223 %1\n\n%4 20224 %1\n\nError %2: %3\n\nPress F1 for more information. 20225 %1\n\nError %2: %3 20226 %1\n\nError %2: %3\nDiagnostic: %4 20227 %1\n\nError %2: %3\nResponse: %4 20228 %1\n\nError %2: %3\nFail Code: %4 20229 %1\n\nError %2: %3\nName: %4 20230 One or more requested network protocols did not connect successfully.\n\n 20231 Press Accept to use the connection as is, or Hang Up to disconnect. 20232 Cannot retrieve protocol information. 20233 The New Password and Confirm New Password fields do not match. 20234 Dialing... 20235 64K Digital 20236 56K Digital 20237 56K Voice 20238 Multiple Lines cannot be bundled unless you are calling a PPP server. 20239 This option is not available during logon. 20240 You must check at least one modem or adapter. 20241 Phone numbers 20242 Clone Phonebook Entry 20243 No alternate phonebook is selected. 20244 Cannot create new phonebook. 20245 A personal phonebook has been created and initialized with the contents of the system phonebook. 20246 Phonebook files (*.pbk) 20247 *.pbk 20248 Open Phonebook 20249 pbk 20250 Dial-up shortcut files (*.rnk) 20251 *.rnk 20252 Create Dial-Up Shortcut 20253 lnk 20254 rasphone.hlp 20255 OK 20256 A file named %1 already exists. Overwrite it? 20257 Cannot write the shortcut file. 20258 &Redial 20259 Phone Number Prefixes 20260 &New prefix: 20261 &Prefixes: 20262 Phone Number Suffixes 20263 &New suffix: 20264 &Suffixes: 20265 The phonebook is empty and the 'allow phonebook edits during logon' option is disabled, so you must logon before dialing. 20266 Connected, bundling additional lines 20267 Logon Preferences 20268 Locations 20269 &New location: 20270 &Locations: 20271 '%1' is already in the list. 20272 You have successfully connected to the remote server. You may now use the usual Windows NT programs and utilities as if you were directly connected to the network.\n\n%1\n\n%2 20273 Right-click the Dial-Up Networking Monitor on the task bar to hang up or check the status of your connection. 20274 The 'Close on dial' option hides the phonebook while dialing and closes it as soon as you connect. 20275 All available ISDN lines multi-linked 20276 Cannot edit switch.inf with notepad.exe 20277 The Internet protocols (TCP/IP), are not installed or are disabled for Remote Access. In Control Panel, start Network, go to the Services page, choose 'Remote Access Service' Properties, and press the Network button. 20278 Press Finish to save '%1'. 20279 You must select at least one network protocol. 20280 Before you can call PPP servers you must install a network protocol with the Control Network applet. 20281 The entry is connected. Your changes will be applied the next time the entry is dialed. 20282 Link to %1 failed. Reconnect pending... 20283 &No, do not dial 20284 Cannot view script.log with notepad.exe 20285 Syntax errors were found in the script. Do you wish to view the error log? 20286 The script has halted. 20287 The script has halted due to an error. Do you wish to view the error log? 20288 You must shutdown and restart the computer before changes take effect. Shutdown now? 20289 Cannot load NETCFG.DLL. 20290 NETCFG.DLL call failed. 20291 Status 20292 Connected successfully. 20293 Error %1: %2 29900 Cannot load the Remote Access Connection Manager service.